HPA

Scale Free Flight Forum => Scale, outdoor => Topic started by: Mark. on Aug 26, 2026, 01:27 AM

Title: 1/10th Hawker Hurricane
Post by: Mark. on Aug 26, 2026, 01:27 AM
Hello everyone,

I don't come on here much, but i thought I'd share a video of my build progress. Some of you may have already seen it, but for those that haven't, a few details.

Drawing done for me by Ivan Taylor. He left me with a lot of scope for how to build it. I've been able to add my own touches to the build, which I'm thoroughly enjoying.
Wingspan is just under 48" - so as near as damn it 1/10th scale.
Propulsion is rubber power.
I'll be using scale dihedral, but incorporating a gyro to assist with stability.

It probably won't be one for the purists, but hey ho, each to their own.

Currently working on the prop, spinner and hub assembly. This will feature pitch adjustment for the blades, so we can experiment with that at the trimming stage.

https://youtu.be/lmx4ovp_7UM?is=W3nvJRgrqkCPOUD7

Thanks for reading/watching. 👍🏻
Title: Re: 1/10th Hawker Hurricane
Post by: Squirrelnet on Aug 26, 2026, 03:16 PM
Great update Mark, the Hurricane is looking fantastic. Looks like you are almost ready to cover ?

It's a hugely ambitious project with Gyro, adjustable pitch prop and big too for a rubber model but given your last model was a hugely ambitious and flew I've no doubt you'll do it again.  I suspect a gyro quipped rubber model could be a first

Keep us updated and welcome to HPA3  ;D

Loved the video too BTW :-)
Title: Re: 1/10th Hawker Hurricane
Post by: Mark. on Aug 26, 2026, 08:03 PM
Quote from: Squirrelnet on Aug 26, 2026, 03:16 PMGreat update Mark, the Hurricane is looking fantastic. Looks like you are almost ready to cover ?

It's a hugely ambitious project with Gyro, adjustable pitch prop and big too for a rubber model but given your last model was a hugely ambitious and flew I've no doubt you'll do it again.  I suspect a gyro quipped rubber model could be a first

Keep us updated and welcome to HPA3  ;D

Loved the video too BTW :-)
Thanks Chris. Yeah it's certainly getting there now. I have a couple of small details to add, but yeah, it's pretty much ready to cover.

I've always been the same - i just prefer the stuff that makes my brain work, thinking about how to get around potential obstacles and coming up with solutions to make things work. I think Ivan has enjoyed seeing how I've taken his design/drawing, but added my own ideas and touches to the build. As it is in the video, it weighs in at around 230g - that's including the 2s lipo and all the electronic stuff.

The adjustable pitch prop came about after a conversation with Ivan, as we were discussing some details of the model whilst he was was looking over it. I just had to engineer how to do it! I've kept it nice and simple, but it just required some accurate, close tolerance machining work. Plus, I've made all the parts for it out of brass, so that will help very nicely in the nose as a spot of ballast.

Yes i think you're right, it will be the only rubber powered gyro equipped model in existence too.

Funny you should mention the 'other model'. It's still not trimmed, and has proven to be a real challenge. It's been damaged more times than i care to remember, and i just needed a break from it. So i repaired it and shelved it. It just needs flat calm air to get the trim dialled in. Sunday just gone was flat calm. I only had a couple of hours spare, but i headed out and started the trimming process again. Back to the beginning. I just took it nice and easy, making small adjustments and observing what the Mosquito was doing. There were plenty of areas that highlighted i needed to speak with Ivan and download the thoughts out of my brain. Final flight and it clipped my stooge and damaged the starboard wing tip 😂

But, most importantly, i learned something about the model on every flight. All of this will be put into action when i go out trimming again, and i genuinely cannot wait to get out again. 👍🏻
Title: Re: 1/10th Hawker Hurricane
Post by: Piecost on Aug 26, 2026, 09:35 PM
Fantastic model! I love the scale thickness flying surfaces. They are so characteristic of the full sized plane.

I admired the Doug MacHard plan for this reason, however the increased dihedral somewhat spoiled the effect. My Keil Kraft model definately did not capture the look of the wing at all well.

Can you explain how the wing D-boxes were constructed? I presume that ther were internal ribs.

Tim

Title: Re: 1/10th Hawker Hurricane
Post by: Mark. on Aug 26, 2026, 11:14 PM
Quote from: Piecost on Aug 26, 2026, 09:35 PMFantastic model! I love the scale thickness flying surfaces. They are so characteristic of the full sized plane.

I admired the Doug MacHard plan for this reason, however the increased dihedral somewhat spoiled the effect. My Keil Kraft model definately did not capture the look of the wing at all well.

Can you explain how the wing D-boxes were constructed? I presume that ther were internal ribs.

Tim

Thank you. Yeah it's got quite some depth to the wing chord! When Ivan drew it up for me, he commented on it being the thickest airfoil section he's ever drawn, but as you say, it's needed to keep in with the character of the real aircraft.

Regards the D boxes, I used the sandwich method to create the wing ribs, then retained the front section of each rib after they were cut to size. They were then cut up and placed within the D box to give the upper sheeting some support. I also put some 1/32 balsa in between each support inside the D box for additional support. I don't think they were needed in hindsight.
Title: Re: 1/10th Hawker Hurricane
Post by: OZPAF on Aug 28, 2026, 04:04 AM
That is quite an effort Mark - thanks for the video. I noticed your neat adjusters - for the Gyro Platform and the tail - very neat.

How are you adjusting the propeller pitch?

Good luck with it.

John
Title: Re: 1/10th Hawker Hurricane
Post by: Mark. on Aug 28, 2026, 12:59 PM
Quote from: OZPAF on Aug 28, 2026, 04:04 AMThat is quite an effort Mark - thanks for the video. I noticed your neat adjusters - for the Gyro Platform and the tail - very neat.

How are you adjusting the propeller pitch?

Good luck with it.

John
Hello John. Yes there's been some work put into it to get it to this stage. The adjusters are made out of delrin - it's light and takes a thread. The downside is you can't glue it very easily. But there's ways around that!

Simple really regards the prop pitch. It's a brass tube, within a brass tube to act as a support, then the inner brass tube sits inside a brass bush with a thread. The thread is home to a m3 grub screw, which tightens down on the brass tube passing through it.

Probably not the best description to get your head around tbh, so I'll try and upload an image.
Title: Re: 1/10th Hawker Hurricane
Post by: dputt7 on Aug 28, 2026, 05:36 PM
  Not sure if John was thinking the same as me but I thought it was adjustable in the air as are some of the Indoor models. ;D
Title: Re: 1/10th Hawker Hurricane
Post by: Mark. on Aug 28, 2026, 06:15 PM
Quote from: dputt7 on Aug 28, 2026, 05:36 PMNot sure if John was thinking the same as me but I thought it was adjustable in the air as are some of the Indoor models. ;D
Yeah none of that mate. I could probably make something to adjust the prop pitch under power like the F1B/Wakefields, but it's more work than I can be bothered to undertake 😂
Title: Re: 1/10th Hawker Hurricane
Post by: Squirrelnet on Aug 28, 2026, 08:40 PM
In flight pitch adjustment or not it's still pretty impressive,

Gyros are something I've not used but talking to Ivan he tells me they are installed at an angle which gives a turn to the model, how do you arrive at the angle and can you change it ?
Title: Re: 1/10th Hawker Hurricane
Post by: Mark. on Aug 28, 2026, 09:09 PM
Quote from: Squirrelnet on Aug 28, 2026, 08:40 PMIn flight pitch adjustment or not it's still pretty impressive,

Gyros are something I've not used but talking to Ivan he tells me they are installed at an angle which gives a turn to the model, how do you arrive at the angle and can you change it ?
Thanks Chris.

Yeah that's correct mate. So if you set the gyro up level, it will maintain a straight and level flight. Not ideal! So you install the gyro on an adjustable platform, which then allows the model to bank in the desired direction of turn - to the right in the case of the Hurricane.

You arrive at the desired angle at the trimming stage, so adjusting the platform and test gliding/flying the model to evaluate the level of turn.

For the Hurricane I've made the platform out of carbon sheet and tube, with a threaded delrin adjuster. You simply turn an m3 cap head (nylon), to adjust the angle that the gyro sits at. It shows the platform in the video, but maybe the adjuster is not that clear mate.
Title: Re: 1/10th Hawker Hurricane
Post by: OZPAF on Aug 29, 2026, 03:09 AM
Thanks for the explanation Mark.
Dave's comment re in flight pitch change would be an interesting complication but I'm not sure how helpful it would be.
Gearing the prop to allow a smaller prop perhaps as Stephen - Prosper,is doing ?
Anyway good luck with it.

John
Title: Re: 1/10th Hawker Hurricane
Post by: Mark. on Aug 29, 2026, 09:45 AM
Quote from: OZPAF on Aug 29, 2026, 03:09 AMThanks for the explanation Mark.
Dave's comment re in flight pitch change would be an interesting complication but I'm not sure how helpful it would be.
Gearing the prop to allow a smaller prop perhaps as Stephen - Prosper,is doing ?
Anyway good luck with it.

John
No problem John. It will make more sense when you see it anyway. I agree, having the pitch adjustable would be an interesting complication. Having looked at the intricacies of the variable pitch hubs, I think I'd be into uncharted territory too. The pitch changes when the motor torque has reduced sufficiently, and that's done using springs or a torque bar. I would have to experiment with different spring rates to obtain the required movement, so in this instance, I'm more than happy to give it a swerve!

I'm not sure plastic gears would survive very long from the motor in the Hurricane tbh. Prop will be quite a good size - coming in at 19" diameter. I'll be attaching the blades using strimmer wire as well for an element of 'crash proofing'.

Interestingly though, even with a prop that large, it didn't look ridiculously oversized when we offered one of Ivan's (many!) props up.

Prop hub is made and utilises bearings i am also using the prop shaft for a F1B/Wakefield. 3mm in diameter running on the roller bearings makes for a nice front end. I'm also using the Piserchio hook at the rear and F1B/Wakefield parts up at the front end. Ivan uses this sort of setup on all his big scale models, so I've chosen to follow this path as well. I'm always a bit of a sucker for some nicely cnc'd aluminium parts! 😂
Title: Re: 1/10th Hawker Hurricane
Post by: OZPAF on Aug 30, 2026, 03:40 AM
QuoteI'm not sure plastic gears would survive very long from the motor in the Hurricane tbh. Prop will be quite a good size - coming in at 19" diameter. I'll be attaching the blades using strimmer wire as well for an element of 'crash proofing'.

Hmm! Yes I agree - bit of an oversight on my part.

Thanks again for all the info on your interesting project.

John
Title: Re: 1/10th Hawker Hurricane
Post by: Prosper on Aug 31, 2026, 11:21 AM
Quote from: OZPAFGearing the prop to allow a smaller prop perhaps as Stephen - Prosper,is doing ?
I can't imagine the forces generated in the powertrain of a model this gigantic, but surely they'll be hefty, with a capital h,e,f,t and y. Now, that's not to say that Medieval Europeans said - Oh, like we can't like build these like, yeah, windmills, because we've only got these plastic gearwheels from China . . . in other words there must be a 'gearing solution' for a 1/10 scale Hurricane to be had - but a daunting project, maybe . . . Also to consider is that with gearing where the prop turns faster than the motor, the rubber motor will be bigger (thicker) than for a direct-drive setup - so even more heft required . . .

Picture: suggestion for suitable winder for your model.

Stephen.
Title: Re: 1/10th Hawker Hurricane
Post by: Piecost on Aug 31, 2026, 03:01 PM
Mark

I am following this thread with great interest. I would love to find out details of the propeller design i.e. blade angle, twist, chord, etc as well as its mechanical design.

Tim
Title: Re: 1/10th Hawker Hurricane
Post by: Mark. on Aug 31, 2026, 07:41 PM
Quote from: Prosper on Aug 31, 2026, 11:21 AM
Quote from: OZPAFGearing the prop to allow a smaller prop perhaps as Stephen - Prosper,is doing ?
I can't imagine the forces generated in the powertrain of a model this gigantic, but surely they'll be hefty, with a capital h,e,f,t and y. Now, that's not to say that Medieval Europeans said - Oh, like we can't like build these like, yeah, windmills, because we've only got these plastic gearwheels from China . . . in other words there must be a 'gearing solution' for a 1/10 scale Hurricane to be had - but a daunting project, maybe . . . Also to consider is that with gearing where the prop turns faster than the motor, the rubber motor will be bigger (thicker) than for a direct-drive setup - so even more heft required . . .

Picture: suggestion for suitable winder for your model.

Stephen.

I am 100% confident that a geared setup would be doable, but I'm not sure I can see its worth, when I know that the model will fly with the 'standard' rubber motor/prop combo. I would also be limited on space in the nose due to the location of the battery box for the gyro. Yes, I could move it to another location, but even at 1/10 scale, there's not a huge amount of area in the nose itself. Then to add in more weight with it requiring a beefier motor, I feel it would be adding in complication for the sake of it.

Don't get me wrong, I can see the benefit of a geared setup in a rubber model, I just don't see the benefit in this particular application. 


Title: Re: 1/10th Hawker Hurricane
Post by: Mark. on Aug 31, 2026, 07:49 PM
Quote from: Piecost on Aug 31, 2026, 03:01 PMMark

I am following this thread with great interest. I would love to find out details of the propeller design i.e. blade angle, twist, chord, etc as well as its mechanical design.

Tim

Thanks for following along! Although I'm not sure how much information I can give you on the propeller blade design, due to tapping into Ivan's many years of flying duration model airplanes - with a lot of success!

The details I can give you though are as follows:

Blade length 9.5"
Blade width at widest point 42mm
Blade carved out of 3/8" medium c grain balsa

As far as blade angle goes, that will be something I can measure when we have carried out the initial setup and trimming flights. Again, I will be tapping into Ivan's knowledge base for this.

I have actually made a start on the carving of the blades today, and have one complete blade.

I'll have to resize some images so I can upload them on to here so you can see the prop hub assembly.
Title: Re: 1/10th Hawker Hurricane
Post by: Piecost on Aug 31, 2026, 09:09 PM
Thanks Mark, an information is appreciated. My winter project is restoring a mates Ta152H from the FSMWW2 book doubled up to 10:1 scale also. I was considering making a Maxfliart bucket prop, but making an Ivan type prop would be great!
Title: Re: 1/10th Hawker Hurricane
Post by: Mark. on Aug 31, 2026, 11:07 PM
So hopefully, there should be some images attached showing the propeller blade I've carved today, the process from block, to shaped to finished, a test fit of the blade on the model to see what it looks like, and the prop hub.
Title: Re: 1/10th Hawker Hurricane
Post by: Mark. on Aug 31, 2026, 11:25 PM
Ok, so here's some more images that show the prop hub and the additions for the adjustable propeller pitch, and also you can just about make out the tubes that support the inserts with the strimmer wire in.

The other 2 images show the finished propeller blade and how much twist you get from a 3/8" sheet of balsa over a 9.5" length. All that's left to do is install the brass tube for the strimmer wire to be secured into.
Title: Re: 1/10th Hawker Hurricane
Post by: Piecost on Sep 01, 2026, 12:33 AM
Mark, thanks for the photos and statistics. I will study them in detail when it comes to making my own propeller. The nearly vertical photo of the blade is appreciated as it will enable me to reverse engineer the planform. It looks much more slender than the 2 blader I had sketched out for my friends model.

Am I correct in understanding that the strimmer cable is perminantly glued into each blade?

Just a comment; since I am not able to judge if it is right or wrong; but I am supprised how little twist there is along each blade.

I love the idea of adjustable pitch and the elegant solution you have used.

If I may; I have some more questions;
Is there a target finished airframe mass?
Do you have an initial rubber motor mass, number of strands and width in mind?
I look foward to seeing the nose block and to find out if you employ an engineered method of thrustline adjustment or will rely on shims.

I have the Aeromodeller magazines in which Ivan described his scale models. Your build is useful to understand how his methods are applied.


Tim




Title: Re: 1/10th Hawker Hurricane
Post by: Mark. on Sep 01, 2026, 01:11 AM
Quote from: Piecost on Sep 01, 2026, 12:33 AMMark, thanks for the photos and statistics. I will study them in detail when it comes to making my own propeller. The nearly vertical photo of the blade is appreciated as it will enable me to reverse engineer the planform. It looks much more slender than the 2 blader I had sketched out for my friends model.

Am I correct in understanding that the strimmer cable is perminantly glued into each blade?

Just a comment; since I am not able to judge if it is right or wrong; but I am supprised how little twist there is along each blade.

I love the idea of adjustable pitch and the elegant solution you have used.

If I may; I have some more questions;
Is there a target finished airframe mass?
Do you have an initial rubber motor mass, number of strands and width in mind?
I look foward to seeing the nose block and to find out if you employ an engineered method of thrustline adjustment or will rely on shims.

I have the Aeromodeller magazines in which Ivan described his scale models. Your build is useful to understand how his methods are applied.


Tim

No problem at all Tim.

Yeah so the strimmer wire glued into the brass tubes on both sides - so into the prop hub and the blade. You set the pitch before the glue has set, so a slow drying CA is the weapon of choice in this instance.

Yeah not much twist at all, but from memory, the blade is positioned at around 43 degrees at the spinner/prop hub on my Mosquito. It's obviously less as the twist in the blade changes towards the tip.

Thanks. The adjustable pitch solution is just very simple, but also effective in its function. It will also make any repairs/replacement to the blades easier too.

As far as weight goes, I genuinely have no idea. When I weighed it recently and it was over 200g, I was disappointed. But you then have a word with yourself and remind yourself that it's a big model. There's a decent amount of wood in the build, but also the electronics too.

Motor strands/weight will also be Ivan's department. He will handle the model and make a suggestion for initial trimming flights. Dependant on how the Hurricane responds to the motor strands, will then dictate if it's changed.

When I've been out with Ivan, thrust line adjustments on these sorts of models are minimal. Any adjustments will be made with shims though. I have toyed with the idea of making a nose ring with the ability to make easy thrust line adjustments, using grub screws, but I'm not decided yet.
Title: Re: 1/10th Hawker Hurricane
Post by: Prosper on Sep 01, 2026, 05:31 PM
Quote from: Mark.. . .Don't get me wrong, I can see the benefit of a geared setup in a rubber model, I just don't see the benefit in this particular application.
Yup, I think that's a good assessment. I didn't mention friction losses, and possible unpleasant noises from the gears. Your latest pics bring home the massiveness of the prop hub and bearing assy.

Stephen.
Title: Re: 1/10th Hawker Hurricane
Post by: Mark. on Sep 01, 2026, 06:08 PM
Quote from: Prosper on Sep 01, 2026, 05:31 PM
Quote from: Mark.. . .Don't get me wrong, I can see the benefit of a geared setup in a rubber model, I just don't see the benefit in this particular application.
Yup, I think that's a good assessment. I didn't mention friction losses, and possible unpleasant noises from the gears. Your latest pics bring home the massiveness of the prop hub and bearing assy.

Stephen.

Yeah I had a feeling that noise may be an issue, after hearing some of the electric motored gearbox models. Not a fan! 😂
Title: Re: 1/10th Hawker Hurricane
Post by: Piecost on Sep 02, 2026, 09:14 PM
Thanks for the detailed reply Mark.

I'll let you post more information before bombarding you with more questions 😀

Tim
Title: Re: 1/10th Hawker Hurricane
Post by: ZIP.58 on Sep 02, 2026, 10:13 PM
Mark, that's a great project. Hopefully you'll have enough space to fly the finished model.
I also had—unfortunately, I had—a Hurricane, powered by up to 30 strands of 3/16" string and a 16" propeller. The model flew well, but I didn't have enough space. Now it's on display at a friend's shop, who owns a specialty store.

I wish you every success and look forward to seeing how this turns out.
Peter

Please let me insert a photo.
Title: Re: 1/10th Hawker Hurricane
Post by: Mark. on Sep 02, 2026, 10:47 PM
Quote from: Piecost on Sep 02, 2026, 09:14 PMThanks for the detailed reply Mark.

I'll let you post more information before bombarding you with more questions 😀

Tim
No problem at all.

Just fire away with any questions you have Tim, I honestly don't mind and will do my best to answer them for you.
Title: Re: 1/10th Hawker Hurricane
Post by: Mark. on Sep 02, 2026, 10:54 PM
Quote from: ZIP.58 on Sep 02, 2026, 10:13 PMMark, that's a great project. Hopefully you'll have enough space to fly the finished model.
I also had—unfortunately, I had—a Hurricane, powered by up to 30 strands of 3/16" string and a 16" propeller. The model flew well, but I didn't have enough space. Now it's on display at a friend's shop, who owns a specialty store.

I wish you every success and look forward to seeing how this turns out.
Peter

Please let me insert a photo.
Thank you, kind of you to say. We do have a decent size area to fly at locally, and Ivan has flown his big rubber models there with great results.

That's a shame that you didn't have enough space to fly yours! It looks great in the picture you've posted.
Title: Re: 1/10th Hawker Hurricane
Post by: Mark. on Sep 06, 2026, 08:52 PM
So the eagle eyed amongst you may have noticed a mistake that I made in the image showing the 3 blades in various stages of carving. The finished one was absolutely fine - but the other 2 blanks were marked up for counter rotation. Whoops!

So over the last couple of evenings I've been rectifying my mistake. The results can be seen in the attached images. I've weighed them all, and they come in at a hefty 2.03g per blade. Nicely under cambered and shaped on the top. Very happy with the results. Ivan has given the blade his seal of approval, so onwards with the next jobs I guess.

The pair of pliers is being used to hold the hub assembly upright for photographic purposes, but it also goes a long way in showing just how big the prop on the Hurricane is.
Title: Re: 1/10th Hawker Hurricane
Post by: Mark. on Sep 07, 2026, 11:32 PM
Hoping to make a start on painting the pilot soon. It's a resin printed pilot and has quite a lot of nice detail.

There's also an imposter too. It's a 1/10th Luftwaffe pilot. He's for a future project 👍🏻
Title: Re: 1/10th Hawker Hurricane
Post by: TheLurker on Sep 08, 2026, 09:05 PM
Lovely carpentry Mark.
Title: Re: 1/10th Hawker Hurricane
Post by: Mark. on Sep 14, 2026, 11:31 PM
Spinnery spinner spun. The particular Hurricane I will be depicting has a 'Rotol' spinner, opposed to the de havilland type, so that's what I've tried to make a copy of. Happy with how it's turned out!

I've made a start hollowing it out now.
Title: Re: 1/10th Hawker Hurricane
Post by: Mark. on Sep 15, 2026, 10:40 PM
Little bit more progress. Propeller looks massive in the image, but it's just the angle I've taken the picture at.