And here is something from the past...
I like to think that many of us have some models that were truly flops in one way or another.
Mine is the Avro F monoplane, built around 2012-2013, documented initially in SFA and then in HPA.
A labor of love in terms of construction and attention to detail and a complete failur when it came to flying. Never managed to trim it properly, mainly perhaps because I never bothered to do the work involved. Something must have been fundamentaly wrong to begin with, I suspect wings warped that prevented a proper turn. And other factors as well.
Before this year's BMFA indoor nationals I decided to take it along to give it another try. Upon taking it out of the box to check I was shocked to discover it had a broken tail and fuselage. I did remember droping the box one time but did not notice any damage then. So I quickly close the box and put it aside, flying my Moth Major peanut instead in Open Rubber. It did unexpectedly well getting 3rd place.
With November IIFI in Holland approaching, I decided to repair it and give it another go, so here a much shorter "repair thread" on that. There is also a parallel build going one, that will get its' own thread.
The damage was on the horizontal tail and the rear fuselage where the stab attaches. I also wanted to straighten and strengthen the wings, so this meant removing all the covering from everywhere. It would be impossible to match the paint color of 2013 today.
So, I am now in the process of recovering.
This time I elected to leave the outer wood surfaces unpainted as they will be painted over anyway. Hope it does not show through, it did not in the previous state.
And the new build on the background
It is good to see you repair this lovely model. What are you covering the delicate structure with?
Tim
Quote from: Piecost on Sep 07, 2026, 08:52 PMIt is good to see you repair this lovely model. What are you covering the delicate structure with?
More importantly; what are you covering those legs with!? :)
Thanks Tim,
The structure may look delicate, being scale in cross sections but it is of basswood, so does have some extra strength.
The covering is pre-shrunk esaki.
Lurk, today we had 35 degrees outside, yesterday 38. It cools down in the evening thankfully. I knew I should have cropped that pic, saw it too late.
George
[/quote]
More importantly; what are you covering those legs with!? :)
[/quote]
I had similar thoughts Lurks, but at least I had manners enough not to say anything ;D ;D
In 2016 I attended the IIFI for the first time as a spectator, and I saw an Avro. (first and second pictures). The man winding in the 2nd picture, is that you, George?
I was a spectator again in 2019 and saw the same model, or another one (3rd picture).IMG_6777.JPGIMG_6797.JPGIMG_0613.JPG
Yes it is...
Forgot to add that in the second picture it is being wound under the watchful eye of Tommy Westlin from Finland...
Covering finished now, shrinking done, doping comes next
first picture, parts drying after shrinking.
Second picture, the fuselage after two coats of dope, with the nose assembly temporary in place.
Next step is to paint everything in fabric color. Then shade painting will follow.
It will take a few days to tackle that.
Made the first step of painting today. Sprayed the base fabric color.
Masked the fuselage front first as best as I could. Last thing I wanted was a beige aluminium cabin cladding. Would have been much easier without all those landing gear legs and stuff.
The wringles are the result of slow drying acrylic paint. Took the complete night for the covering to shrink back to normal again.
That's better...
Next is some more masking, then shading and the Avro lettering on the sides.
And the rest of the parts, now dry and taught.
By next week they should be shaded for that fabric semi-transclusent effect
Lookimg good. Can I ask what paint did you use?
Vallejo acrylic 71.132.
See here as well
https://hpa.aeromodelling.gr/index.php?topic=13.msg2002#msg2002
Jorgos, I'm familiar with your models and your attention to detail. I'm simply speechless.
Best regards,
Peter
Thanks for the link.
Tim
Magnificent engine, but I think you had better check the tappet clearances on #3.
I am really amazed at how you can tell from so far away. And you always seem to focus on the third cylinder... ;D ;D ;D
https://hpa.aeromodelling.gr/index.php?topic=13.msg1873#msg1873
Rather slow progress, but progress nevertheless...
The masking for the wooden frame took well over three days. With breaks because it is quite a boring and terrible task. No pioneer aircraft for some time for me please.
Did not take many pictures just two of the fuselage almost masked and the result afterwards. That purpple stuff is Humbrol Mascol, a stuff I hated when I first used it but now thoroughly use and recommend.
Lighting conditions do not help to see the difference and I could/should have sprayed the darker shade a bit more. Not going to mask again and redo. What is done is done.
Also regretted gluing the covering to the uprights and crosspieces in some places. Does not look that good... I thought it would be more natural not to have it pefectly taught. Wrong...
Next is masking for the Avro lettering on the fuselage sides and the wing bottom surfaces.
And after a huge one-month jump, I can declare it finished...
Ready to be put in a box to travel to the IIFI.
I plan to post pictures I took in between at a later date.
Weight came ok, at 30,7 grams without rubber, I guess 34-35 ready to fly (if it does...)
Wing loading a good 9,2 gr/dm2
George