HPA

Indoor Free Flight Forum => General Discussion => Topic started by: _shadow_ on Nov 11, 2026, 05:01 PM

Title: K&P Winder with Digital Counter
Post by: _shadow_ on Nov 11, 2026, 05:01 PM
Added a digital counter to the K&P Winder.


Regards
Marcus
Title: Re: K&P Winder with Digital Counter
Post by: _shadow_ on Nov 11, 2026, 05:01 PM
Build photos.
Title: Re: K&P Winder with Digital Counter
Post by: Piecost on Nov 12, 2026, 10:05 AM
Nice work Shadow,

Can you share an details about the electronic box of tricks?

I installed the K&P supplied kit, where the handle bumps a switch. But, it can miss turns if wound too quickly
Title: Re: K&P Winder with Digital Counter
Post by: Jmk89 on Nov 12, 2026, 10:14 AM
It looks like a magnet actuated counter - these are quite cheap through Temu. I like the idea of attaching a magnet to an arm rotated by the output shaft. Is that a counterbalance on the other end of the rotating arm?
Title: Re: K&P Winder with Digital Counter
Post by: _shadow_ on Nov 12, 2026, 04:45 PM
Quote from: Piecost on Nov 12, 2026, 10:05 AMNice work Shadow,

Can you share an details about the electronic box of tricks?

I installed the K&P supplied kit, where the handle bumps a switch. But, it can miss turns if wound too quickly

The digital counter, OMRON H7EC, I found it at a local electronic store, I can't remember exactly how much it costed as this was an old project.

The specification are here -> https://www.alldatasheet.com/datasheet-pdf/view/172819/OMRON/H7EC.html

I was lucky to have found it easily here at that time.

Regards
Marcus
Title: Re: K&P Winder with Digital Counter
Post by: _shadow_ on Nov 12, 2026, 04:47 PM
Quote from: Jmk89 on Nov 12, 2026, 10:14 AMIt looks like a magnet actuated counter - these are quite cheap through Temu. I like the idea of attaching a magnet to an arm rotated by the output shaft. Is that a counterbalance on the other end of the rotating arm?

Yup, just some small lead weight at the opposite end.

I have a 3D printer now, and these parts can be easily designed and printed.

I made 2 at that time, swapped 1 of it with my flying buddy, I think he is still using it.


Regards
Marcus