Welcome to HPA. Please login or sign up.

Members
  • Total Members: 376
  • Latest: Andrew
Stats
  • Total Posts: 6,864
  • Total Topics: 481
  • Online today: 55
  • Online ever: 484 (Oct 19, 2026, 11:51 AM)
Users Online

Recent topics

Fokker F.VIIa

Started by Stunthenk, Aug 07, 2026, 04:19 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Stunthenk

Today I fiddeled about with the paper template untill it fit the aperture and looked correctly scale-like in my eyes. I  then transfered the shape to a fresh piece of heavy paper and used this final template to cut out the windows from thin clear plastic sheet. Then I stuck a piece of the burnished alu tape over the paper, trimmed that and cut out the windows from the back. I put in the folds using two thin metal rulers, scored the clear window piece in the correct places and bent that too (just visible behind the windshield). Next step is to try and get this windshield in its proper place!IMG_6090.JPG

OZPAF

I just came across this interesting restored and colourised clip of the 1924 flight from Amsterdam to Batavia.

https://www.youtube.com/watch?v=EQmK1_Audaw

John

chris46

A fantastic model, perfect for a museum display case. The level of detail on the engine is breathtaking.

Chris46

Stunthenk

Very nice film! A great find. Note that the airplane is the first F.VII, much different from the F.VIIa that I am modelling. Apart from the Napier Lion inline engine, which will be easier to model, the structure is more complicated. However, if anyone wants to have a go, I have an accurate drawing that I can make available!
A strange interlude in the film is F.VIIA H-NADP that appears for a few moments. That was built in 1927!

Stunthenk

The windscreen needed individual windows to conform to the required angles between the panels. I could then glue it in place with PVA white glue. The exhaust manifolds in balsa did not work; when almost sanded to the right shape, a piece always broke off! In the end I used plastic rod, bent to shape with round nosed plyers and pairs angled and glued together and then trimmed to shape. Then they and the balsa central ring were painted a reddish brown colour (Humbrol 70) and when dry rubbed with graphite powder to create a burnt metal look. When all this was finished, I made up a propshaft from 1 mm piano wire, fitted a 6" Peck Polymer prop and weighed the model. 28,5 grams, wonderfull! But then I checked the C/G, it was way off! I estimate the model will need 7 grams of noseweight, of which I have fitted 5. The model needs some more details added, and the decals, but it is now ready for the first trimming flights next Sunday. IMG_6095.JPGIMG_6096.JPGIMG_6094.JPG

OZPAF

Very impressive - an inline motor example would have lost a lot of the charm!

Good luck with the trimming.

John

Stunthenk

Ramses made me a set of decals for the F.VIIa, wonderfull as ever. They allowed me to give the model its identity. These large decals are not easy to apply, however. They tend to retain air pockets under them after drying; and the adhesive is'n very strong on tissue either. I used Humbrol Decalfix to solve this. It is a liquid, smelling sligtly of ammonia and softens decals to allow them to conform to irregularities and when applied under a decal it draws the decal to the surface. In the second picture you can see Decalfix applied under the N and in the process of drying. On the underside of the wing the decal with ACT hadn't adhered very well; I could easily pull it loose, without tearing. So I applied Decalfix to the entire area where the decal would go and reapplied the decal. It is necessary to remove any airbubbles from under the decal with a Q-tip. In the third picture this decal is also drying. But perhaps with a later model I will paint the white areas.
With the model now wearing its identity, it was time for further details. Studying the pictures of the plane as it arrived at Schiphol in 1956 I noticed it had exhausts with silencers. These were later removed in the museum, together with the DC3 wheels and replaced with 1920's items. But I want the model in its 1956 guise. Therefore two silencer equipped exhausts were made from plastic rod and tubing. In the fourth picture they are painted Humbrol Metalcote 27003 and when dry will be rubbed with graphite powder for a nice metallic sheen.IMG_6121.JPG
IMG_6119.JPGIMG_6123.JPGIMG_6122.JPG

Spiros (Spyros)

WOW!!! Excellent!!

dputt7

Very neat, nice attention to detail.

ZIP.58

I'm Happy—she's just a great model

Peter

TheLurker

What a lovely model.  Any chance we'll see it at Walsall next year?
Ένας χωρίς μια ιδέα ή, αν προτιμάτε, clueless  :)

Stunthenk

First it will have to survive the IIFI.....

Squirrelnet

Yes superb model. Good luck at IIFI

OZPAF

Yes good luck with it at the IIFI.

John