Welcome to HPA. Please login or sign up.

Members
  • Total Members: 376
  • Latest: Andrew
Stats
  • Total Posts: 6,889
  • Total Topics: 481
  • Online today: 28
  • Online ever: 484 (Oct 19, 2026, 11:51 AM)
Users Online

Recent topics

Makri Free Flight Timer

Started by g_kandylakis, Jun 16, 2026, 05:52 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Nigel_M

Hi George,
thanks for that answer. I think it was well worth describing your approach because, while I was aware of the method, I suspect many are not and simply blame the controllers for being inconsistent or difficult to program. Hopefully highlighting the issue will help others come to the realisation.

People could also use a battery analyser gadget if it has a discharge function by consistently discharging freshly charged batteries to a chosen voltage before using them. Mine allows the discharge voltage to be set and it's pretty old now. That is just like duration rubber flyers do by winding then back-widing to a chosen toque.

cheers
Nigel

lincoln

#16
Reply to Nigel_M in post #13:
I suspect that there's far more hysteresis with rubber than with partially discharging a battery. With rubber, if you wind to 1,000 turns, you will have quite a bit more torque than if you fully wind to 1,100 turns and back off 100. It probably works better if you wind to a certain torque and then back off a certain number of turns. If torque was steady when unwinding, backing off to s certain torque might be a little better. I'm not sure doing anything like this is useful with batteries or capacitors. With CO2, I suspect that there is hysterisis, or maybe reverse hysterisis, if you partially discharge before launch, depending on temperature changes in the tank due to just how much time there is between charging,discharging, and launch. For instance, if you discharge quickly to a certain pressure, the tank will be cooler and the pressure will recover somewhat as it warms back up to ambient temperature.